HowTo use kamikaze b43
Achtung, Technikthema!
Seit den neuesten openwrt.org-Entwicklungen (Nov'2009) laeuft nun auch der Quelloffene b43-WLAN-Treiber mit einem aktuellen Linuxkernel auf den Linksys-Geraeten (oder aehnlicher Hardware):
root@OpenWrt:/# uname -a Linux OpenWrt 2.6.30.9 #1 Fri Nov 13 07:00:26 UTC 2009 mips GNU/Linux
root@OpenWrt:/# iw dev wlan0 station dump Station 00:1d:73:55:d5:83 (on wlan0) inactive time: 280 ms rx bytes: 18070094 rx packets: 65827 tx bytes: 245584 tx packets: 3409 signal: -68 dBm tx bitrate: 36.0 MBit/s
Garnicht zu erwaehnen brauche ich das der aktuelle OLSR-Dienst und der Rate-Auswahl-Algorithmus "minstrel" problemlos funktioniert. Folgendermassen koennt ihr das selbst nachvollziehen:
Flashen einer aktuellen trunk-Version: http://downloads.openwrt.org/snapshots/trunk/brcm47xx/openwrt-brcm47xx-squashfs.trx
Dann aendern folgender Config Eintraege, um im weimarnetz mitzumischen:
/etc/config/wireless
config wifi-device radio0 option type mac80211 option macaddr <00:AA:BB:CC:DD:EE> option channel 5 option hwmode 11ng option htmode HT40+ list ht_capab SHORT-GI-40 list ht_capab DSSS_CCK-40
config wifi-iface option device radio0 option mode adhoc option ssid weimarnetz option bssid 02:ca:ff:ee:ba:be
/etc/config/network (folgenden Eintrag hinzufuegen)
config 'interface' 'weimarnetz' option 'ifname' 'wlan0' option 'proto' 'static' option 'ipaddr' '10.63.15.129' # einstellungen fuer option 'netmask' '255.0.0.0' # knotennummer 115 option 'dns' '141.1.1.1'
Danach nur noch bei 'lan' die bridge auskommentieren (mit einem #) und ein 'reboot' - fertig!
Mutige koennen dann noch mittels 'opkg update ; opkg install olsrd' weiterspielen.... fries43 12:41, 20. Nov. 2009 (UTC)