Änderungen

[[Category:Howto]]

{{Vorlage:LinksReparieren}}

<h2>Howto install the OpenWRT-Firmware on a Linksys WRT54g</h2>

<h2>Howto install the OpenWRT-Firmware on a Linksys WRT54g</h2>

OpenWRT by default installs telnet on the Linksys. To access it you need a telnet client, which is installed on most Operating Systems by default. Connect your computer to one of the LAN-Ports on the back of the Linksys. To open a telnet-connection:

OpenWRT by default installs telnet on the Linksys. To access it you need a telnet client, which is installed on most Operating Systems by default. Connect your computer to one of the LAN-Ports on the back of the Linksys. To open a telnet-connection:

*on Windows: -->Startmenu-->Ausführen--> telnet 192.168.1.1

*on Windows: -->Startmenu-->Ausf�?¼hren--> telnet 192.168.1.1

*on MacOSX: Programme -> Dienstprogramme -> Terminal.app ausführen. telnet 192.168.1.1

*on MacOSX: Programme -> Dienstprogramme -> Terminal.app ausf�?¼hren. telnet 192.168.1.1

*on Linux: telnet 192.168.1.1

*on Linux: telnet 192.168.1.1

   '''ifconfig <name-of-WAN-interface> xxx.xxx.xxx.xxx''' (put in an ip used on the LAN)

   '''ifconfig <name-of-WAN-interface> xxx.xxx.xxx.xxx''' (put in an ip used on the LAN)

   '''route add default gw xxx.xxx.xxx.xxx''' (put in the ip of the gateway)

   '''route add default gw xxx.xxx.xxx.xxx''' (put in the ip of the gateway)

   '''echo 141.54.1.1 >> /etc/resolv.conf'''  (this configures the nameservers)

   '''echo "nameserver 141.54.1.1" >> /etc/resolv.conf'''  (this configures the nameservers)

   '''ping subsignal.org''' (to test if it works, abort with CTRL-C)

   '''ping subsignal.org''' (to test if it works, abort with CTRL-C)

.. to be continued

.. to be continued