Howto Freifunk Firmware

Neue Firmware für den Linksys WRT54 G (und GS)

Firmware runterladen

Die Freifunk Firmware findest du unter http://ff-firmware.sourceforge.net/ oder die aktuelle Version 0.6.8 direkt hier. Diese musst Du runterladen und dann ...
Bitte halte dich aber an die FirmwareEinstellungen vom weimarnetz

Boot_wait setzen (falls was schiefgeht)

The boot_wait variable needs to be set, to cause the WRT to delay the boot process for a few seconds, allowing a new firmware to be installed through the bootloader.

This variable needs to be set via a "hack" using the ping functionality in the web interface. In the web interface, navigate to the Administration -> Diagnostics page, and hit the Ping button.

Enter each of these lines into the "ip address or domain name" text box, and hit "ping" after each entry:

;cp${IFS}*/*/nvram${IFS}/tmp/n
;*/n${IFS}set${IFS}boot_wait=on
;*/n${IFS}commit
;*/n${IFS}show>tmp/ping.log

After the last command, a long list of configuration parameters is shown, and it should include

boot_wait=on

aus: http://martybugs.net/wireless/openwrt/flash.cgi

Neue Firmware installieren

... to be continued

Siehe auch:

• Howto OpenWRT
• http://www.freifunk.net/wiki/FreifunkFirmware