|
|
| (16 dazwischenliegende Versionen von 5 Benutzern werden nicht angezeigt) |
| Zeile 1: |
Zeile 1: |
| − | == Neue Firmware für den Linksys WRT54 G (und GS) ==
| + | {{Vorlage:Löschen}} |
| | | | |
| − | === Firmware runterladen ===
| + | #REDIRECTION [[Konfiguration (Linksys)]] |
| − | | |
| − | Die Freifunk Firmware findest du unter http://ff-firmware.sourceforge.net/ oder die aktuelle Version 0.6.8 direkt [http://styx.commando.de/sven-ola/ipkg/openwrt-g-freifunk-0.6.8-de.bin hier]. Diese musst Du runterladen und dann ...
| |
| − | | |
| − | === Boot_wait setzen (falls was schiefgeht) ===
| |
| − | The boot_wait variable needs to be set, to cause the WRT to delay the boot process for a few seconds, allowing a new firmware to be installed through the bootloader.
| |
| − | | |
| − | This variable needs to be set via a "hack" using the ping functionality in the web interface. In the web interface, navigate to the Administration -> Diagnostics page, and hit the Ping button.
| |
| − | | |
| − | Enter each of these lines into the "ip address or domain name" text box, and hit "ping" after each entry:
| |
| − | | |
| − | ;cp${IFS}*/*/nvram${IFS}/tmp/n
| |
| − | ;*/n${IFS}set${IFS}boot_wait=on
| |
| − | ;*/n${IFS}commit
| |
| − | ;*/n${IFS}show>tmp/ping.log
| |
| − | | |
| − | After the last command, a long list of configuration parameters is shown, and it should include
| |
| − | | |
| − | boot_wait=on
| |
| − | | |
| − | aus: http://martybugs.net/wireless/openwrt/flash.cgi
| |
| − | | |
| − | === Neue Firmware installieren ===
| |
| − | | |
| − | ... to be continued
| |
| − | | |
| − | | |
| − | Siehe auch:
| |
| − | | |
| − | * [[Howto OpenWRT]]
| |
| − | * http://www.freifunk.net/wiki/FreifunkFirmware
| |
| − | | |
| − | [[Category:Howto]]
| |
