HowTo use kamikaze b43: Unterschied zwischen den Versionen
(Konfiguration von TP-Link TL-WR1043ND übernommen) |
K (+test) |
||
Zeile 50: | Zeile 50: | ||
Danach nur noch bei 'lan' die bridge auskommentieren (mit einem #) und ein 'reboot' - fertig! | Danach nur noch bei 'lan' die bridge auskommentieren (mit einem #) und ein 'reboot' - fertig! | ||
Mutige koennen dann noch mittels 'opkg update ; opkg install olsrd' weiterspielen.... [[Benutzer:Fries43|fries43]] 12:41, 20. Nov. 2009 (UTC) | Mutige koennen dann noch mittels 'opkg update ; opkg install olsrd' weiterspielen.... [[Benutzer:Fries43|fries43]] 12:41, 20. Nov. 2009 (UTC) | ||
+ | |||
+ | =TEST= | ||
+ | <pre> | ||
+ | [12:57:52] … config wifi-device radio0 | ||
+ | option type mac80211 | ||
+ | option channel 5 | ||
+ | option macaddr 94:0c:6d:xx:xx:xx | ||
+ | option hwmode 11ng | ||
+ | option htmode HT20 | ||
+ | list ht_capab HT40+ | ||
+ | list ht_capab HT40- | ||
+ | list ht_capab SHORT-GI-40 | ||
+ | list ht_capab DSSS_CCK-40 | ||
+ | # REMOVE THIS LINE TO ENABLE WIFI: | ||
+ | option disabled 0 | ||
+ | |||
+ | config wifi-iface | ||
+ | option device radio0 | ||
+ | option network lan | ||
+ | option mode ap | ||
+ | option ssid www.evernet-eg.de | ||
+ | option encryption psk2 | ||
+ | option key 12345 | ||
+ | |||
+ | config wifi-iface | ||
+ | option device radio0 | ||
+ | option network freifunk | ||
+ | option mode adhoc | ||
+ | option sw_merge 1 | ||
+ | option ssid sundi.freifunk.net | ||
+ | option encryption 0 | ||
+ | option bssid 02:ca:ff:ee:ba:be | ||
+ | option frag 2346 | ||
+ | </pre> |
Version vom 26. August 2010, 13:19 Uhr
Achtung, Technikthema!
Seit den neuesten openwrt.org-Entwicklungen (Nov'2009) laeuft nun auch der Quelloffene b43-WLAN-Treiber mit einem aktuellen Linuxkernel auf den Linksys-Geraeten (oder aehnlicher Hardware):
root@OpenWrt:/# uname -a Linux OpenWrt 2.6.30.9 #1 Fri Nov 13 07:00:26 UTC 2009 mips GNU/Linux
root@OpenWrt:/# iw dev wlan0 station dump Station 00:1d:73:55:d5:83 (on wlan0) inactive time: 280 ms rx bytes: 18070094 rx packets: 65827 tx bytes: 245584 tx packets: 3409 signal: -68 dBm tx bitrate: 36.0 MBit/s
Garnicht zu erwaehnen brauche ich das der aktuelle OLSR-Dienst und der Rate-Auswahl-Algorithmus "minstrel" problemlos funktioniert. Folgendermassen koennt ihr das selbst nachvollziehen:
Flashen einer aktuellen trunk-Version: http://downloads.openwrt.org/snapshots/trunk/brcm47xx/openwrt-brcm47xx-squashfs.trx
Dann aendern folgender Config Eintraege, um im weimarnetz mitzumischen:
/etc/config/wireless
config wifi-device radio0 option type mac80211 option macaddr <00:AA:BB:CC:DD:EE> option channel 5 option hwmode 11ng option htmode HT40+ list ht_capab SHORT-GI-40 list ht_capab DSSS_CCK-40
config wifi-iface option device radio0 option mode adhoc option ssid weimarnetz option bssid 02:ca:ff:ee:ba:be
/etc/config/network (folgenden Eintrag hinzufuegen)
config 'interface' 'weimarnetz' option 'ifname' 'wlan0' option 'proto' 'static' option 'ipaddr' '10.63.15.129' # einstellungen fuer option 'netmask' '255.0.0.0' # knotennummer 115 option 'dns' '141.1.1.1'
Danach nur noch bei 'lan' die bridge auskommentieren (mit einem #) und ein 'reboot' - fertig!
Mutige koennen dann noch mittels 'opkg update ; opkg install olsrd' weiterspielen.... fries43 12:41, 20. Nov. 2009 (UTC)
TEST
[12:57:52] … config wifi-device radio0 option type mac80211 option channel 5 option macaddr 94:0c:6d:xx:xx:xx option hwmode 11ng option htmode HT20 list ht_capab HT40+ list ht_capab HT40- list ht_capab SHORT-GI-40 list ht_capab DSSS_CCK-40 # REMOVE THIS LINE TO ENABLE WIFI: option disabled 0 config wifi-iface option device radio0 option network lan option mode ap option ssid www.evernet-eg.de option encryption psk2 option key 12345 config wifi-iface option device radio0 option network freifunk option mode adhoc option sw_merge 1 option ssid sundi.freifunk.net option encryption 0 option bssid 02:ca:ff:ee:ba:be option frag 2346