A=$(nvram get lan_ifnames); # configures, which devices/interfaces are in bridge
B=$(nvram get lan_ifname);
C=$(nvram get wl0_ifname);
D=$(nvram get wifi_ifname);
E=$(nvram get wan_ifname);
F=$(nvram get boardtype);
G=$(nvram get boardnum);
echo $F-$G : \"$A\" \"$B\" \"$C\" \"$D\" \"$E\";
Knotennummer Geraet Ausgabe
36 Siemens SE505 0x0101- : "vlan0 vlan2 eth2 eth3" "br0" "eth1" "eth1" "vlan1"
166 Siemens SE505 0x0101- : "vlan0 eth2" "br0" "eth1" "eth1" "vlan1" - OK!
16 Linksys ? 0x0101-42 : "" "br0" "eth1" "eth1" "vlan1"
54 Linksys-WRT54G 0x0708-42 : "" "br0" "eth1" "eth1" "vlan1"
240 Linksys-WRT54G 0x0708-42 : "vlan0 eth2 eth3" "br0" "eth1" "eth1" "vlan1"
518 Asus500gPremium 0x042f-45 : "vlan0" "br0" "eth2" "eth2" "vlan1
104 Linksys-WRT54GL 0x0467-42 : "vlan0" "br0" "eth1" "eth1" "vlan1"
513 Dell2300 bcm94710ap-44 : "eth0" "br0" "eth2" "eth2" "eth1" - OK!
517 WAP_v10 bcm94710dev-2 : "" "br0" "eth2" "eth2" "none"
766 Allnet 0277 bcm94710dev-42 : "vlan2 eth2" "br0" "eth2" "" "vlan1"
519 Asus_WL_HDD bcm94710dev-asusX : "" "br0" "eth2" "eth2" "eth1"
520 Asus500g(old) bcm94710dev-asusX : "" "br0" "eth2" "eth2" "vlan1"
128 WAP ?? ??
ipkg install kmod-usb-uhci (?)
ipkg install kmod-usb2
= kmod-usb-core
= kmod-usb2
(insmod usbcore)
(insmod ehci-hcd)
ipkg install libpthread (?)
ipkg install kmod-videodev
ipkg install philips-webcam (weimarnetz-repo)
ipkg install http://ftp.iasi.roedu.net/mirrors/openwrt.org/backports/rc5/motion_3.2.6-1_mipsel.ipk
ipkg install http://naaa.de/programme/motion/libjpeg_6b-1_mipsel.ipk
ipkg install lsusb
ipkg install kmod-usb-storage
ipkg install kmod-vfat
(mount -t usbfs none /proc/bus/usb) ???
motion.conf:
http://www.lavrsen.dk/twiki/bin/view/Motion/ConfigFileOptions
daemon on
quiet on
videodevice /dev/v4l/video0
width 640
height 480
target_dir /mnt/usbstick
jpeg_filename %Y/%m/%d/%H_20-40/%M.%S.cam
snapshot_filename %Y/%m/%d/%H_20-40/%M.%S.snap
snapshot_interval 60
text_left "Bastian TV"
locate on # draw box around moved object
low_cpu 1 # only 1 picture per second when no moving
framerate 2 # maximum per second
webcam_port 8080
webcam_localhost off
webcam_motion 1 # only 1 frame per second when no motion
- von langsam nach schnell - einfach dinge hinzufuegen
- die klassendefinition / L7-Definitionen sind ausgelagert, ist mehr nen framework
fkt_table class 1 networking icmp,syn,ack,olsr,dns,small net1
fkt_table class 2 game wow,moha,quake,cs net1
fkt_table class 2 remote_access ssh,telnet,rdp,vnc,X11 net1
fkt_table class 2 phone H323,skype,skypeout,teamspeak,sip net1
fkt_table class 2 monitoring snmp,ntp net1
fkt_table class 3 www http,https net1
fkt_table class 4 streaming radio,shoutcast,icecast,flash,youtube net1
fkt_table class 4 networking openVPN,tinc,vtun,bgp net1
fkt_table class 4 mail imap,pop3,spop,smtp,ssmtp,nntp net1
fkt_table class 4 chat aim,icq,msn,jabber,yahoo,irc net1
fkt_table class 5 printer lpd net1
fkt_table class 5 file samba,ftp net1
fkt_table class 5 p2p ipp2p net1
fkt_table class 5 unknown unknown,ssl,update net1
WAP v1.0 flashen
----------------
- Resetknopf solange druecken, bis LAN-LED ausgehen und wieder angehen
- IP vom WAP = 192.168.1.245
- Username: leerlassen
- Passowort: admin
- Firmware bei mir: v2.07, Apr 08, 2004; MustDie revision 1
-> Help -> Firmware upgrade
- flashen mit: "Freya-v2.06-1sv.trx"
- Firmware nun: "v2.06, Dec 16, 2003"
- telnet einschalten (setup -> ganz unten)
- nvram get boot_wait ->muss "on" sein.
# nvram show|grep lan
lan_netmask=255.255.255.0
http_lanport=80
lan_stp=1
lan_hwaddr=00:0C:41:13:EF:CF
lan_ifnames=eth1 eth2
lan_ipaddr=192.168.1.245
lan_proto=static
lan_ifname=br0
lan_hwnames=et1 wl0
# free
total used free shared buffers
Mem: 14540 5240 9300 0 876
Swap: 0 0 0
Total: 14540 5240 9300
- http://192.168.1.245/fw-conf.asp ->downgrade-header disable 8-)
- flashen mit: "openwrt-freifunk-v1.2.5.trx"