Dave's Web-Log
Steuerbare-Webcam(logitech sphere) unter Win
- AbelCam-Programm --> AbelCam
- easy to use programm
- nicht ganz billig (20 Euros)
- kostenlose Version mit Einschränkungen (Laufzeit 6 Stunden pro Tag)
- Installation Windoofs typisch: next --> next --> Enter
Steuerbare-Webcam(logitech sphere) unter Linux(Ubuntu)
- Motion-Programm --> Motion-Wiki
benötigte Programme / Dateien | Befehle |
---|---|
gcc | apt-get install gcc |
make | apt-get install make |
module-assistant | apt-get install module-assistant |
pwc - Webcamdriver | mit module-assistant in den Kernel kompilieren und installieren |
apache2 | apt-get install apache2 |
php4
|
apt-get install php5
|
motion (mind.Version 3.2.1)
|
apt-get install motion |
Cambozola Java-Applet runterladen und in /var/www kopieren | Link --> Cambozola |
Wie geht das von statten?
Als erstes mal die ganzen sachen installieren! Wenn schon die PWC-Driver für die kamera dabei sind, braucht ihr nicht noch die zu kompalieren. Dann kannst du ab dem apache2 anfangen zu installieren.
- Lege unter /var/www eine neue Datei an die livecam.htm heisst.
vi /var/www/livecam.htm
- Kopiere dir diesen Quelltext rein.
<html> <head> <title>Webcam - Pan and Tilt</title> </head> <body text="#000000" bgcolor="#EEF0E0" link="#0000EE" vlink="#551A8B" alink="#FF0000"> <center> <h2>Web Camera - Logitech Sphere - Pan and Tilt</h2> <applet code=com.charliemouse.cambozola.Viewer archive=cambozola.jar width=320 height=240> <param name=url value=http://Deine_IP_Adresse:8081> </applet> </center> <form name="pantilt" action="control204pt.php" method="post"> <center> Click buttons below to rotate and tilt camera.<br> <INPUT TYPE=SUBMIT NAME="command" VALUE="Pan Left "> <INPUT TYPE=SUBMIT NAME="command" VALUE=" L5 "> <INPUT TYPE=SUBMIT NAME="command" VALUE=" L4 "> <INPUT TYPE=SUBMIT NAME="command" VALUE=" L3 "> <INPUT TYPE=SUBMIT NAME="command" VALUE=" L2 "> <INPUT TYPE=SUBMIT NAME="command" VALUE=" L1 "> <INPUT TYPE=SUBMIT NAME="command" VALUE="Center Pan"> <INPUT TYPE=SUBMIT NAME="command" VALUE=" R1 "> <INPUT TYPE=SUBMIT NAME="command" VALUE=" R2 "> <INPUT TYPE=SUBMIT NAME="command" VALUE=" R3 "> <INPUT TYPE=SUBMIT NAME="command" VALUE=" R4 "> <INPUT TYPE=SUBMIT NAME="command" VALUE=" R5 "> <INPUT TYPE=SUBMIT NAME="command" VALUE="Pan Right"><br> <INPUT TYPE=SUBMIT NAME="command" VALUE="Tilt Down"> <INPUT TYPE=SUBMIT NAME="command" VALUE=" D5 "> <INPUT TYPE=SUBMIT NAME="command" VALUE=" D4 "> <INPUT TYPE=SUBMIT NAME="command" VALUE=" D3 "> <INPUT TYPE=SUBMIT NAME="command" VALUE=" D2 "> <INPUT TYPE=SUBMIT NAME="command" VALUE=" D1 "> <INPUT TYPE=SUBMIT NAME="command" VALUE="Center Tilt"> <INPUT TYPE=SUBMIT NAME="command" VALUE=" U1 "> <INPUT TYPE=SUBMIT NAME="command" VALUE=" U2 "> <INPUT TYPE=SUBMIT NAME="command" VALUE=" U3 "> <INPUT TYPE=SUBMIT NAME="command" VALUE=" U4 "> <INPUT TYPE=SUBMIT NAME="command" VALUE=" U5 "> <INPUT TYPE=SUBMIT NAME="command" VALUE=" Tilt Up "><br> <INPUT TYPE=SUBMIT NAME="command" VALUE="Calibrate"> </center> </form> </body> </html>
- unter Deine_IP_Adresse müsst ihr natürlich eure IP eintragen
- als nächstes legen wir die Steuerungsdatei an mit
vi /var/www/control204pt.php
- und dann kopiere dir diesen Quelltext rein
<? Header("HTTP/1.0 204 No Content"); $command = (IsSet($_REQUEST['command'])) ? $_REQUEST['command'] : ""; switch ($command) { case " L5 ": readfile('http://username:password@localhost:8080/0/track/set?pan=-200&tilt=0'); break; case " L4 ": readfile('http://username:password@localhost:8080/0/track/set?x=-60&y=1000'); break; case " L3 ": readfile('http://username:password@localhost:8080/0/track/set?x=-45&y=1000'); break; case " L2 ": readfile('http://username:password@localhost:8080/0/track/set?x=-30&y=1000'); break; case " L1 ": readfile('http://username:password@localhost:8080/0/track/set?x=-15&y=1000'); break; case "Center Pan": readfile('http://username:password@localhost:8080/0/track/set?x=0&y=1000'); break; case " R1 ": readfile('http://username:password@localhost:8080/0/track/set?x=15&y=1000'); break; case " R2 ": readfile('http://username:password@localhost:8080/0/track/set?x=30&y=1000'); break; case " R3 ": readfile('http://username:password@localhost:8080/0/track/set?x=45&y=1000'); break; case " R4 ": readfile('http://username:password@localhost:8080/0/track/set?x=60&y=1000'); break; case " R5 ": readfile('http://username:password@localhost:8080/0/track/set?pan=200&tilt=0'); break; case " U5 ": readfile('http://username:password@localhost:8080/0/track/set?pan=0&tilt=100'); break; case " U4 ": readfile('http://username:password@localhost:8080/0/track/set?x=1000&y=20'); break; case " U3 ": readfile('http://username:password@localhost:8080/0/track/set?x=1000&y=15'); break; case " U2 ": readfile('http://username:password@localhost:8080/0/track/set?x=1000&y=10'); break; case " U1 ": readfile('http://username:password@localhost:8080/0/track/set?x=1000&y=5'); break; case "Center Tilt": readfile('http://username:password@localhost:8080/0/track/set?x=1000&y=0'); break; case " D1 ": readfile('http://username:password@localhost:8080/0/track/set?x=1000&y=-5'); break; case " D2 ": readfile('http://username:password@localhost:8080/0/track/set?x=1000&y=-10'); break; case " D3 ": readfile('http://username:password@localhost:8080/0/track/set?x=1000&y=-15'); break; case " D4 ": readfile('http://username:password@localhost:8080/0/track/set?x=1000&y=-20'); break; case " D5 ": readfile('http://username:password@localhost:8080/0/track/set?pan=0&tilt=-100'); break; case "Pan Left ": readfile('http://username:password@localhost:8080/0/track/set?pan=-10&tilt=0'); break; case "Pan Right": readfile('http://username:password@localhost:8080/0/track/set?pan=10&tilt=0'); break; case " Tilt Up ": readfile('http://username:password@localhost:8080/0/track/set?pan=0&tilt=5'); break; case "Tilt Down": readfile('http://username:password@localhost:8080/0/track/set?pan=0&tilt=-5'); break; case "Calibrate": readfile('http://username:password@localhost:8080/0/config/set?text_left=CAMERA%20CALIBRATING%20POSITION'); readfile('http://username:password@localhost:8080/0/detection/pause'); readfile('http://username:password@localhost:8080/0/track/set?x=-69&y=24'); sleep(5); readfile('http://username:password@localhost:8080/0/track/set?x=69&y=-29'); sleep(3); readfile('http://username:password@localhost:8080/0/track/set?x=65&y=-5'); sleep(2); readfile('http://username:password@localhost:8080/0/config/set?text_left=CAMERA'); readfile('http://username:password@localhost:8080/0/detection/start'); default: break; } ?>
- danach noch die motion.conf datei bearbeiten (hier meine bsp.conf)
# Minimal motion example config file provided by the # Debian motion package - for basic webcam operation. # # You most certainly want to investigate # /usr/share/doc/motion/examples/motion-dist.conf.gz # for further configuration options. Also, refer to the # motion man page and /usr/share/doc/motion/motion_guide.html # for detailed information on configuration options. daemon on quiet on # You may very well need to change this (check with 'dmesg' # after plugging in your webcam) videodevice /dev/video0 # Image size in pixels (valid range is camera dependent) width 320 height 240 framerate 2 quality 85 auto_brightness off # Initial brightness, contrast, hue (NTSC), and saturation # 0 = disabled (valid range 0-255) brightness 0 contrast 0 saturation 0 hue 0 # Encode movies in real-time (install ffmpeg before enabling) ffmpeg_cap_new off # Target base directory for pictures and films # You should probably change this (create dir beforehand) target_dir /tmp jpeg_filename bild # Define a port number (e.g. 8000) to enable the mini-http server # 0 = disabled webcam_port 8081 # Set to 'off' to allow anybody (not just localhost) to view the # webcam via the mini-http server (http://hostname:port) webcam_localhost off webcam_quality 50 webcam_maxrate 8 # Drivertyp der Steuerung track_type 3 #Steuerungs-Port control_port 8080 #Control html control_html_output on # user und pw control_authentication
- die Dateien stammen alle von Kenneth Lavrsen und wurden leicht modifiziert
- viel spass!
Aldi-Webcam Qtec Webcam 100 Pac207-BCA installieren
nachschauen was los ist :-) also in die console eintippen.
dmesg
da sollte dann so etwas rausgespuckt werden:
drivers/media/video/spca5xx/spca5xx-main.c: USB SPCA5XX camera found. Qtec Webcam 100 Pac207-BCA
als nächstes überprüfen wir noch die usb-meldung
lsusb
da sollte dann so etwas rausgespuckt werden:
ID 093a:2460 Pixart Imaging, Inc.
nun zum driver installieren: 1. in das Verzeichnis wechseln und neusten driver runterladen mit
cd ~ wget http://mxhaard.free.fr/spca50x/Download/spca5xx-20060501.tar.gz
2. jetzt zu root werden und dann noch die nötigen pakete mit apt zum compilieren runterladen
sudo su Password:xxxx apt-get install linux-headers-`uname -r` linux-restricted-modules-`uname -r` build-essential
3. Dann den spca5xx Quellcode kompilieren. Das linux Material wird unter /usr/src angebracht. Folgende Befehle eingeben: ins Verzeichnis gehen, downgeloadete Quellakten verschieben, den Quellcode auspacken und dann ins Verzeichnis gehen.
cd /usr/src mv ~/spca5xx-20060501.tar.gz . tar xfvz spca5xx-20060501.tar.gz cd spca5xx-20060501
4. Jetzt Variable CC setzen für das spca5xx makefile. In diesem Fall benutzt Ubuntu edgy Eft GCC 4.1 als Kernelcompiler
export CC=gcc-4.1
5. Einen Link zurück zu Quellcode setzen.
ln -s /usr/src/linux-headers-`uname -r` /lib/modules/`uname -r`/build
6. Jetzt den spca5xx Quellcode kompilieren, entfernen der alten Treiber, neuen Treiber laden und installieren. Die folgenden Befehle der reihe nach eingeben:
make modprobe -r spca5xx rm -rf /lib/modules/`uname -r`/kernel/drivers/usb/media/spca5xx* make install modprobe spca5xx
Fertig!
Philips-Webcam TouCam XS PCVC 820K installieren
nachschauen was los ist :-) also in die console eintippen.
lsusb
da sollte dann so etwas rausgespuckt werden:
OmniVision Technologies, Inc. OV518 WebCam
nun zum driver installieren: 1. in das Verzeichnis wechseln und neusten driver runterladen mit
cd ~ wget http://ovcam.org/ov511/download/2.xx/distros/ov511-2.32.tar.bz2
2. jetzt zu root werden und dann noch die nötigen pakete mit apt zum compilieren runterladen
sudo su Password:xxxx apt-get install linux-headers-`uname -r` linux-restricted-modules-`uname -r` build-essential
3. Dann den ov511 Quellcode kompilieren. Das linux Material wird unter /usr/src angebracht. Folgende Befehle eingeben: ins Verzeichnis gehen, downgeloadete Quellakten verschieben, den Quellcode auspacken und dann ins Verzeichnis gehen.
cd /usr/src mv ~/ov511-2.32.tar.bz2 . bunzip2 ov511-2.32.tar.bz2 tar xfv ov511-2.32.tar cd ov511-2.32
4. Jetzt Variable CC setzen für das ov511 makefile. In diesem Fall benutzt Ubuntu edgy Eft GCC 4.1 als Kernelcompiler
export CC=gcc-4.1
5. Einen Link zurück zu Quellcode setzen.
ln -s /usr/src/linux-headers-`uname -r` /lib/modules/`uname -r`/build
6. Jetzt den ov511 Quellcode kompilieren, entfernen der alten Treiber, neuen Treiber laden und installieren. Die folgenden Befehle der reihe nach eingeben:
make modprobe -r ov511 rm -rf /lib/modules/`uname -r`/kernel/drivers/usb/media/ov511* make install modprobe ovcamchip modprobe ov511
Wiki-Vorlagen
- Vorlage:G23-server <-- Variable
- Vorlage:Link-Bild