Zeile 13: |
Zeile 13: |
| * 5) opkg install mjpg-streamer-input-uvc | | * 5) opkg install mjpg-streamer-input-uvc |
| * 6) opkg install mjpg-streamer-output-http | | * 6) opkg install mjpg-streamer-output-http |
| + | * |
| * 7) /www/webcam/index.html erstellen<sup>:</sup> | | * 7) /www/webcam/index.html erstellen<sup>:</sup> |
| <syntaxhighlight lang="arrow"> | | <syntaxhighlight lang="arrow"> |
Zeile 26: |
Zeile 27: |
| </html> | | </html> |
| </syntaxhighlight> | | </syntaxhighlight> |
| + | Anstelle 10.63.115.1 muss natürlich die ip-Adresse des Routers eingetragen werden! |
| | | |
| ===Konfiguration anpassen=== | | ===Konfiguration anpassen=== |
| + | Die config-datei befindet sich in /etc/config/mjpg-streamer<syntaxhighlight lang="arrow"> |
| + | onfig mjpg-streamer 'core' |
| + | option enabled '1' |
| + | option input 'uvc' |
| + | option output 'http' |
| + | option device '/dev/video0' |
| + | option resolution '1024x768' |
| + | option yuv '0' |
| + | option quality '80' |
| + | option fps '5' |
| + | option led 'auto' |
| + | option www '/www/webcam' |
| + | option port '8080' |
| + | #option listen_ip '192.168.1.1' |
| + | #option username 'openwrt' |
| + | #option password 'openwrt' |
| + | </syntaxhighlight>Der streamer wird gestartet mit |
| + | |
| + | /etc/init.d/mjpg-streamer start |
| + | |
| + | Danach ist der stream im Browser zusehen: |
| + | |
| + | [http://10.63.nnn.1/webcam http://10.63.115.1/webcam] |
| + | |
| + | Auch hier muß natürlich die Adresse des Routers anstelle von 10.63.115.1 eingetragen werden. |
| + | |
| + | Weitere Informationen gibt es unter: |
| + | |
| + | https://openwrt.org/docs/guide-user/hardware/video/webcam |
| + | |
| + | |
| + | |
| + | |
| + | |
| <blockquote> | | <blockquote> |
| | | |