HowTo use kamikaze b43: Unterschied zwischen den Versionen
K (layout) |
K |
||
Zeile 28: | Zeile 28: | ||
option channel 5 | option channel 5 | ||
option hwmode 11g | option hwmode 11g | ||
− | + | ||
config 'wifi-iface' 'weimarnetz' | config 'wifi-iface' 'weimarnetz' | ||
option device wifi0 | option device wifi0 |
Version vom 20. November 2009, 14:45 Uhr
Achtung, Technikthema!
Seit den neuesten openwrt.org-Entwicklungen (Nov'2009) laeuft nun auch der Quelloffene b43-WLAN-Treiber mit einem aktuellen Linuxkernel auf den Linksys-Geraeten (oder aehnlicher Hardware):
root@OpenWrt:/# uname -a Linux OpenWrt 2.6.30.9 #1 Fri Nov 13 07:00:26 UTC 2009 mips GNU/Linux
root@OpenWrt:/# iw dev wlan0 station dump Station 00:1d:73:55:d5:83 (on wlan0) inactive time: 280 ms rx bytes: 18070094 rx packets: 65827 tx bytes: 245584 tx packets: 3409 signal: -68 dBm tx bitrate: 36.0 MBit/s
Garnicht zu erwaehnen brauche ich das der aktuelle OLSR-Dienst und der Rate-Auswahl-Algorithmus "minstrel" problemlos funktioniert. Folgendermassen koennt ihr das selbst nachvollziehen:
Flashen einer aktuellen trunk-Version: http://downloads.openwrt.org/snapshots/trunk/brcm47xx/openwrt-brcm47xx-squashfs.trx
Dann aendern folgender Config Eintraege, um im weimarnetz mitzumischen:
/etc/config/wireless
config 'wifi-device' 'wifi0' option type mac80211 option channel 5 option hwmode 11g config 'wifi-iface' 'weimarnetz' option device wifi0 option mode adhoc option ssid weimarnetz option bssid 02:ca:ff:ee:ba:be
/etc/config/network (folgenden Eintrag hinzufuegen)
config interface 'weimarnetz' option proto static option ipaddr 10.63.115.1 # einstellungen fuer option netmask 255.0.0.0 # knotennummer 115 option dns 141.1.1.1
Danach nur noch ein 'wifi up' und fertig! Mutige koennen dann noch mittels 'opkg update ; opkg install olsrd' weiterspielen.... fries43 12:41, 20. Nov. 2009 (UTC)