Webcam-Howto-2023: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
K |
K |
||
Zeile 13: | Zeile 13: | ||
* 5) opkg install mjpg-streamer-input-uvc | * 5) opkg install mjpg-streamer-input-uvc | ||
* 6) opkg install mjpg-streamer-output-http | * 6) opkg install mjpg-streamer-output-http | ||
+ | * | ||
* 7) /www/webcam/index.html erstellen<sup>:</sup> | * 7) /www/webcam/index.html erstellen<sup>:</sup> | ||
<syntaxhighlight lang="arrow"> | <syntaxhighlight lang="arrow"> | ||
Zeile 26: | Zeile 27: | ||
</html> | </html> | ||
</syntaxhighlight> | </syntaxhighlight> | ||
+ | Anstelle 10.63.115.1 muss natürlich die ip-Adresse des Routers eingetragen werden! | ||
===Konfiguration anpassen=== | ===Konfiguration anpassen=== | ||
+ | Die config-datei befindet sich in /etc/config/mjpg-streamer<syntaxhighlight lang="arrow"> | ||
+ | onfig mjpg-streamer 'core' | ||
+ | option enabled '1' | ||
+ | option input 'uvc' | ||
+ | option output 'http' | ||
+ | option device '/dev/video0' | ||
+ | option resolution '1024x768' | ||
+ | option yuv '0' | ||
+ | option quality '80' | ||
+ | option fps '5' | ||
+ | option led 'auto' | ||
+ | option www '/www/webcam' | ||
+ | option port '8080' | ||
+ | #option listen_ip '192.168.1.1' | ||
+ | #option username 'openwrt' | ||
+ | #option password 'openwrt' | ||
+ | </syntaxhighlight>Der streamer wird gestartet mit | ||
+ | |||
+ | /etc/init.d/mjpg-streamer start | ||
+ | |||
+ | Danach ist der stream im Browser zusehen: | ||
+ | |||
+ | [http://10.63.nnn.1/webcam http://10.63.115.1/webcam] | ||
+ | |||
+ | Auch hier muß natürlich die Adresse des Routers anstelle von 10.63.115.1 eingetragen werden. | ||
+ | |||
+ | Weitere Informationen gibt es unter: | ||
+ | |||
+ | https://openwrt.org/docs/guide-user/hardware/video/webcam | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
<blockquote> | <blockquote> | ||
Version vom 18. Juli 2023, 20:29 Uhr
An einem FreifunkRouter mit USB-Interface soll eine USB-Web-Cam angeschlossen werden.
Der Video-Stream soll im Freifunk-Netz als Dienst bereitgestellt werden.
Geeigneter Router: TP-Link TL-WR902AC v3.
Ablauf der Installation
Pakete auf dem Router installieren
- 1) Freifunk Firmware openwrt- 21.02.6-9 Release ab 217 installieren.
- 2) opkg update ausführen
- 3) opkg install kmod-video-uvc
- 4) opkg install mjpg-streamer
- 5) opkg install mjpg-streamer-input-uvc
- 6) opkg install mjpg-streamer-output-http
- 7) /www/webcam/index.html erstellen:
<html>
<head>
<title>MJPG-Streamer - Stream Example</title>
</head>
<body>
<center>
<img src="http://10.63.115.1:8080?action=stream" />
</center>
</body>
</html>
Anstelle 10.63.115.1 muss natürlich die ip-Adresse des Routers eingetragen werden!
Konfiguration anpassen
Die config-datei befindet sich in /etc/config/mjpg-streamer
onfig mjpg-streamer 'core'
option enabled '1'
option input 'uvc'
option output 'http'
option device '/dev/video0'
option resolution '1024x768'
option yuv '0'
option quality '80'
option fps '5'
option led 'auto'
option www '/www/webcam'
option port '8080'
#option listen_ip '192.168.1.1'
#option username 'openwrt'
#option password 'openwrt'
Der streamer wird gestartet mit
/etc/init.d/mjpg-streamer start
Danach ist der stream im Browser zusehen:
Auch hier muß natürlich die Adresse des Routers anstelle von 10.63.115.1 eingetragen werden.
Weitere Informationen gibt es unter:
https://openwrt.org/docs/guide-user/hardware/video/webcam
Noch in Arbeit ! Sorry bis später !!