/etc/init.d/vpn - Versionsgeschichte

Glenn: +kat

2008-03-09T18:59:42Z

+kat

Fries43 am 18. Mai 2007 um 16:16 Uhr

2007-05-18T16:16:07Z

Fries43: skript1

2007-04-04T12:22:17Z

skript1

Neue Seite

<pre>
#!/bin/sh

fkt_infotext() {
logger -p daemon.info -t $0 $1
echo $1
}

fkt_write_olsrd_conf() {
fkt_infotext "generating olsrd.conf ..."
cp /etc/olsrd.conf_head /etc/olsrd.conf
awk '/ifup/ {print $3,$12}' /etc/vtund.conf|
while read IFACE NODE
do
cat>>/etc/olsrd.conf<<EOF

Interface "$IFACE" {
HelloInterval 50.0
HelloValidityTime 900.0
TcInterval 30.0
TcValidityTime 2700.0
MidInterval 150.0
MidValidityTime 2700.0
HnaInterval 150.0
HnaValidityTime 900.0

Ip4Broadcast 10.63.$NODE.253
LinkQualityMult default 0.1
}
EOF
done
}

fkt_netcount_start() {
fkt_infotext "installing netfilter counters ..."
iptables -N vpn_user_outgoing
iptables -N vpn_olsr_outgoing
iptables -N vpn_user_incoming
iptables -N vpn_olsr_incoming
iptables -I OUTPUT -o tap+ -j vpn_user_outgoing
iptables -I OUTPUT -o tap+ -p udp --sport 698 -j vpn_olsr_outgoing
iptables -I INPUT -i tap+ -j vpn_user_incoming
iptables -I INPUT -i tap+ -p udp --dport 698 -j vpn_olsr_incoming
awk '/ifup/ {print $3}' /etc/vtund.conf|
while read IFACE
do
iptables -I vpn_user_outgoing -i $IFACE -j ACCEPT
iptables -I vpn_olsr_outgoing -i $IFACE -j ACCEPT
iptables -I vpn_user_incoming -i $IFACE -j ACCEPT
iptables -I vpn_olsr_incoming -i $IFACE -j ACCEPT

done
}

fkt_netcount_stop() {
fkt_infotext "deleting netfilter counters ..."
iptables -D OUTPUT -o tap+ -j vpn_user_outgoing
iptables -D OUTPUT -o tap+ -p udp --sport 698 -j vpn_olsr_outgoing
iptables -D INPUT -i tap+ -j vpn_user_incoming
iptables -D INPUT -i tap+ -p udp --dport 698 -j vpn_olsr_incoming
iptables -F vpn_olsr_outgoing
iptables -F vpn_user_outgoing
iptables -F vpn_olsr_incoming
iptables -F vpn_user_incoming
iptables -X vpn_olsr_outgoing
iptables -X vpn_user_outgoing
iptables -X vpn_olsr_incoming
iptables -X vpn_user_incoming
}

fkt_start_vtund() {
fkt_infotext "starting vtun-daemon ..."
vtund -f /etc/vtund.conf -s
}

fkt_start_olsrd() {
fkt_infotext "starting olsr-daemon ..."
olsrd -f /etc/olsrd.conf -d 0
}

fkt_kill_olsrd() {
fkt_infotext "ending olsrd-process ..."
PID=$(pidof olsrd)
test ! -z "$PID" && kill
PID=$(pidof olsrd)
test ! -z "$PID" && kill -9 $PID
}

fkt_kill_vtund() {
fkt_infotext "ending vtund-process ..."
PID=$(pidof vtund)
test ! -z "$PID" && kill $PID
}

fkt_interface_up() {
fkt_infotext "starting interface $1 for node $2 ..."
ip addr add dev $1 10.63.$2.254/30 brd 10.63.$2.255
ip link set $1 mtu 1450 up
fkt_infotext "setting host-routes for node $2 ..."
ip route add 10.63.$2.253 dev $1
}

fkt_status_olsrd() {
fkt_infotext "status olsrd:"
}

fkt_status_vtund() {
fkt_infotext "status vtund:"
ps ax|
awk -F tap '/tap/ {
if($2<99&&$2>=0)
printf("tap %2i\n",$2)}'|
sort
}

fkt_status_netcount() {
fkt_infotext "status netcount:"
iptables -nxvL INPUT
iptables -nxvL FORWARD
iptables -nxvL OUTPUT
}

fkt_pingall_clients() {
awk '/ifup/ {printf $1": ";system("ping -c 1 10.63."$12".253|grep \"64 bytes\"");print ""}' /etc/vtund.conf
}

case $1 in
start)
fkt_write_olsrd_conf
fkt_netcount_start
fkt_start_vtund
fkt_start_olsrd
;;
stop)
fkt_kill_olsrd
fkt_kill_vtund
fkt_netcount_stop
;;
restart)
$0 stop
$0 start
;;
status)
fkt_status_olsrd
fkt_status_vtund
fkt_status_netcount
;;
pingtest)
fkt_pingall_clients
;;
ifup)
fkt_interface_up $2 $3
;;
*)
echo "Usage: $0 (start|stop|restart|pingtest|status|ifup INTERFACE NODE)"
;;
esac

</pre>

← Nächstältere Version		Version vom 9. März 2008, 18:59 Uhr
Zeile 221:		Zeile 221:
	esac		esac
	</pre>		</pre>
		+
		+	[[Kategorie:Firmware]]

@@ Zeile 1: / Zeile 1: @@
 <pre>
 #!/bin/sh
@@ Zeile 109: / Zeile 117: @@
          ps ax|
          awk -F tap '/tap/ {
-                 if($2<99&&$2>=0)
+                 if($2<99&&$2>=0){
-                printf("tap %2i\n",$2)}'|
+                        NO=$2*1
          sort
+}
@@ Zeile 122: / Zeile 134: @@
 fkt_pingall_clients() {
-         awk '/ifup/ {printf $1": ";system("ping -c 1 10.63."$12".253|grep \"64 bytes\"");print ""}' /etc/vtund.conf
+         awk '/ifup/ {printf $1": ";system("ping -c 3 10.63."$12".253 | grep \"64 bytes\"");print ""}' /etc/vtund.conf
+}
 case $1 in
          start)
                  fkt_write_olsrd_conf
                  fkt_netcount_start
@@ Zeile 133: / Zeile 183: @@
          ;;
          stop)
                  fkt_kill_olsrd
                  fkt_kill_vtund
@@ Zeile 140: / Zeile 191: @@
                  $0 stop
                  $0 start
          ;;
          status)
@@ Zeile 145: / Zeile 206: @@
                  fkt_status_vtund
                  fkt_status_netcount
          ;;
          pingtest)
@@ Zeile 153: / Zeile 217: @@
          ;;
          *)
-                 echo "Usage: $0 (start|stop|restart|pingtest|status|ifup INTERFACE NODE)"
+                 echo "Usage: $0 ( start |stop | restart | restart_olsr | restart_tunnel | pingtest | status | check | ifup INTERFACE NODE)"
          ;;
 esac
 </pre>